DepthQ HDs3D2 Bedienungsanleitung PDF herunterladen

Sat/Cable + DepthQ

Modulator

Step 1: Connect the HDMI cable between the Sat/Cable Box and the back of the

DepthQ

HDs3D2 Projector.

Step 2: Play some 3D content to determine whether it is in a Side-by-Side or

Top/Bottom format.

Step 3: Turn on 3D in the DepthQ

HDs3D2 Projector: Using the DepthQ

HDs3D2 remote, press Menu; then use the left or right arrows to highlight

Settings 1 and press “Enter” , then arrow down to Advanced 1 and press ;

then arrow up to highlite 3D Setting and ; then arrow up to select 3D Format

and ; then arrow up or down to select either Top/Bottom or Side by Side and

. Let the menu time out and it will disappear.

Step 4: Connect your DepthQ

Polarization Modulator Control Unit to the 3D Sync

output on the back of the DepthQ

HDs3D2 Projector.

Step 5: Position the DepthQ

Modulator in front of the lens, tilt it towards the

center of your silver screen

, connect power, and don your Passive 3D glasses.

Step 6: Play your 3D content. The DepthQ

Polarization Modulator Control Unit

will report ~120Hz. Enjoy double-flashed 120Hz 3D.

Blu-ray/Game Console + Generic Active or DLP Link

®4

Step 1: Connect the HDMI cable between the 3D Blu-ray Player and the back of

the DepthQ

HDs3D2 Projector.

Step 2: Connect your Active Shutter Glasses system to the 3D Sync output on the

back of the DepthQ

HDs3D2 Projector.

Step 3: Position your emitter per system instructions, connect power, activate

your 3D shutter glasses (if required) and don them.

Step 4: Play your 3D Blu-ray/Game content. Enjoy triple-flashed 144Hz 3D.

Blu-ray/Game Console + DepthQ

Modulator

Step 1: Connect the HDMI cable between the 3D Blu-ray Player/Game Console

and the back of the DepthQ

HDs3D2 Projector.

Step 2: Connect your DepthQ

Polarization Modulator Control Unit to the 3D Sync

output on the back of the DepthQ

HDs3D2 Projector.

Step 3: Position the DepthQ

Modulator in front of the lens, tilt it towards the

center of your silver screen

, connect power, and don your Passive 3D glasses.

Step 4: Play your 3D Blu-ray/Game content. The DepthQ

Polarization Modulator

Control Unit will report ~144Hz. Enjoy triple-flashed 144Hz 3D.

Connect your source via HDMI. If necessary, set your source to 1080P.

Blu-ray, DVD, Receiver, Sat/Cable Box or Game Console2D

Connect your source via HDMI or DVI to HDMI

. Set resolution to 1920x1080 at 60Hz.

Computer2D

Step-by-Step Set-Up Guide

DepthQ® Modulator (not included)

Infra-Red Emitter

(not included)

From the 3-pin mini-DIN Sync Output (D) on the back of the

projector

From a 3-pin mini-DIN Sync Output on an NVIDIA Quadro

graphics card at the back of your computer

Or in the case of NVIDIA 3D Vision

, from an open USB port on

your computer.

Section 4 will guide you case-by-case.

These devices can receive 3D Sync from several sources:

Your IR Emitter or DepthQ

Polarization Modulator

For 3D also connect Sync to:

Use either the HDMI 1 or HDMI 2 input port (A). Component, S-Video and Composite inputs may also

be used (cables not included). These formats do not carry Audio. Use (B) or (C) above.

Blu-ray, DVD, Receiver, Sat/Cable Box,

or Game Console using the HDMI Cable

Connect from:

Use either the HDMI 1 or HDMI 2 input port (A). Audio is not transmitted via VGA. For 2D video + audio,

also connect either a mono RCA cable to AUDIO IN (B), or stereo RCA cables (not included) to L and R

Audio inputs (C). If your computer has a digital output, use the included HDMI or DVI cable for both

video and audio from one cable. Audio over DVI may not be transmitted by some graphics cards.

Computer using the DVI to HDMI CableConnect from:

You can connect more than one source if needed.

Connect 2D or 3D Source

LAMP LED blinking RED = Error Code - see User Manual;

LAMP LED solid RED = Lamp Failure.

POWER LED blinking BLUE = Initializing or Cooling;

POWER LED solid BLUE = Standby or ON (Lamp is lit).

POWER LED solid BLUE and LAMP LED solid RED = OFF (Lamp is off)

The top of your projector includes an ON/OFF power

switch and LAMP & POWER LEDs to indicate status:

Projector Status

Note: All projector control is accomplished using the remote.

A 3V lithium battery (CR2025) is typically included (with an insulating

tab to save battery life). To access and remove tab or change the battery:

Ensure Remote has a Battery

PLEASE NOTE: Eye-synchronization options include using Passive Polarized Glasses

(with DepthQ

Polarization Modulator) or Active LC Shutter Glasses (using an IR

Emitter or DLP-Link

technology), These items must be purchased separately.

Visit depthq.com/accessories or depthq.com/modulator for more info.

Save your box and packing materials.

Power

Cable

DVI to

HDMI Cable

HDMI

Cable

Remote ControlProjector with Lens Cap

Here's what's included:

Unpack the Box

Get the Manual

A product of Lightspeed Design, Inc. Bellevue, Washington, USA

Quick

Start

HIGH DEFINITION STEREOSCOPIC 3D VIDEO PROJECTOR

HDs3D2

1 2

Inhaltsverzeichnis

Seite 1 - Unpack the Box

Sat/Cable + DepthQ® ModulatorStep 1: Connect the HDMI cable between the Sat/Cable Box and the back of the DepthQ® HDs3D2 Projector.2Step 2: Play some

Seite 2 - Adjust Zoom and Focus

1 VGA can be used in cases where cable length is required to be longer than HDMI allows.2 Use either the HDMI1 or HDMI2 input.3 When using the DepthQ®

Weitere Dokumente für Projektoren DepthQ HDs3D2

Um das Dokument anzuzeigen DepthQ HDs3D2 Spezifikationen

DepthQ HDs3D2 Spezifikationen (62 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

DepthQ HDs3D2 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Projektoren DepthQ HDs3D2 herunter. DepthQ HDs3D2 User manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Projektoren DepthQ HDs3D2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren DepthQ HDs3D2